FIELD ASSEMBLY CONNECTOR | FTTH Field Assembly Connector SC-APC |
Picture | Diagram |
| |
SC/APC type field assembly connector is the most widely used fiber optic connector in FTTx that does not need epoxy or polishing. It enables fast and spot installation of 2.0mm x 3.0mm cable type connectors even when the installer has no access to power on-site. Two or three pieces of the preassembled and factory terminated connectors can be installed within 2 minutes by using simple tools and they can be reused several times.
-Groove Type:
V-Groove
- Fiber type
SM: Standard Single Mode
- Ferrule Polishing Type
APC Type: Angled Physical Contact
- Connector Type for Adapted Cable
2.0mm X 3.0mm (Flat) Type: All-in-One [2pcs parts]
Item | Specification | |||||
Insertion Loss | Typ. 0.3dB / Max. 0.5dB | |||||
Return Loss | Typ.55dB / Max. 60dB [APC] | |||||
Endurance | 500 times reconnection / ≤ 0.3dB | |||||
Tension | 2.0mm X 3.0mm] 3.0kg / ≤ 0.2dB change | |||||
Temperature Change | 21 times / ‐40°C ~ +75°C / ≤ 0.3dB change |
End Face Geometry | APC type | |||||
Ferrule Endface Radius (mm) | 5~12 | |||||
Fiber Undercut (nm) | Less than 100 | |||||
Fiber Protrusion (nm) | Less than 100 | |||||
Apex Offset (um) | Less than 50 |