3. Optical Performance
3.1 Insertion Loss (IL)
• MTP (IEC 61300‑3‑34)
￮ Single‑mode (Standard): ≤0.75 dB (max), ≤0.50 dB (typical)
￮ Single‑mode (Elite): ≤0.35 dB (max), ≤0.20 dB (typical)
￮ Multi‑mode (Standard): ≤0.6 dB (max), ≤0.50 dB (typical)
￮ Multi‑mode (Elite Low Loss): ≤0.35 dB (max), ≤0.20 dB (typical)
• LC (IEC 61300‑3‑6)
￮ Single‑mode & Multi‑mode: ≤0.3 dB
3.2 Return Loss (RL)
• MTP
￮ Single‑mode (APC 8°): ≥60 dB
￮ Multi‑mode (PC): ≥25 dB
• LC
￮ Single‑mode APC: ≥60 dB; UPC: ≥50 dB
￮ Multi‑mode: ≥35 dB
3.3 Mechanical & Environmental
• Durability: ≤0.3 dB typical change after 200 matings
• Interchangeability: ≤0.2 dB
• Tensile Strength: >70 N
• Operating Temperature: ‑40 °C to +85 °C
4. Compliance Standards
• IEC 61754‑7, IEC 61755
• Telcordia GR‑1435‑CORE
• JIS C 5982
• TIA‑604‑5 (FOCIS5)
• TIA‑568‑C Structured Cabling
• 10G Fiber Channel
• IEEE 802.3 (40G / 100G)
5. Cable Parameters (12F Microfiber Cable)
Item | Value |
Fiber Count | 12 |
Outer Diameter (OD) | 3.0 ± 0.15 mm |
Tensile Strength (Short‑term) | 180 N |
Tensile Strength (Long‑term) | 90 N |
Crush Load (Short‑term) | 500 N/100 mm |
Crush Load (Long‑term) | 150 N/100 mm |
Minimum Bending Radius (Static) | 10D |
Minimum Bending Radius (Dynamic) | 20D |
6. Connector Structure & Dimensions
6.1 Configuration Types
• Type 1: MTP to 12×LC Simplex
￮ Fanout OD: 2.0 mm or 0.9 mm
￮ Fanout Length: 0.5 m
￮ Main Cable OD: 3.0 mm
• Type 2: MTP to 6×LC Duplex
￮ Fanout OD: 2.0×4.1 mm or 0.9 mm
￮ Fanout Length: 0.5 m
￮ Main Cable OD: 3.0 mm
• Type 3: MTP to 6×LC Uniboot
￮ Fanout OD: 2.0 mm or 3.0 mm
￮ Fanout Length: 0.5 m
￮ Main Cable OD: 3.0 mm
6.2 MTP End‑Face 3D Geometry (IEC 61300‑3‑30)
Parameter | Min | Max |
ROC‑X (ABS) | 2000 mm | – |
ROC‑Y (ABS) | 50 mm | – |
Angle‑X | ‑0.2° | ‑0.2° |
Angle‑Y (APC) | 7.85° | 8.15° |
Angle‑Y (PC) | ‑0.2° | ‑0.2° |
Fiber Height | 1000 nm | 3500 nm |
Max DH (All Fiber) | ‑300 nm | 300 nm |
DH (Adjacent) | ‑300 nm | 300 nm |
DH (Average Fiber) | ‑300 nm | 300 nm |
Core Dip (Multi‑mode) | ‑200 nm | 300 nm |
6.3 LC End‑Face Geometry
Parameter | Connector | PC | APC |
Radius of Curvature | SC/FC/ST | 10–25 mm | 5–12 mm |
Radius of Curvature | LC/MU | 7–25 mm | 5–15 mm |
Apex Offset | All | ≤50 μm | – |
Fiber Spherical Height | All | ±100 nm | – |
Angular Offset | All | – | 8° ± 0.5° |
7. End‑Face Quality (IEC 61300‑3‑35:2015)
7.1 Single‑Mode LC
Zone | Range (μm) | Scratches | Defects |
A (Core) | 0–25 | None | None |
B (Cladding) | 25–115 | None | None |
C (Adhesive) | 115–135 | None | None |
D (Contact) | 135–250 | None | None |
E (Ferrule) | – | None | None |
7.2 Multi‑Mode LC
Zone | Range (μm) | Scratches | Defects |
A (Core) | 0–65 | None | None |
B (Cladding) | 65–115 | None | None |
C (Adhesive) | 115–135 | None | None |
D (Contact) | 135–250 | None | None |
E (Ferrule) | – | None | None |
8. Typical Applications
• High‑density data center fiber patching
• 40G LR4 PSM, 40GBASE‑SR4, 40G QSFP+ PLR4 links
• 10/40/100G Ethernet transmission
• Fiber equipment internal interconnection
Home
