External dimensions. 93*86*29 Box material ABS.
Length of invisible fibre optic cable stored inside
The cable storage box has 15M, 20M, 30M, 40M, the maximum length of fiber storage for 40M.
The invisible fibre optic cable is available in two sizes, G657A2 and G657B3.
(II) Electrical/Signal Performance
1. Applicable Cable Types:
• Optical Fiber: Single-mode/multi-mode optical fiber (φ0.9mm/φ2.0mm/φ3.0mm)
• Cable: CAT5e/CAT6/CAT6A network cable, RVV control cable (wire diameter ≤ 2.5mm²)
2. Signal Transmission Characteristics:
• Optical Fiber Interface: Insertion loss ≤ 0.3dB (UPC polishing), return loss ≥ 50dB
• Cable Interface: Near-end crosstalk (NEXT) ≥ 45dB (CAT6 standard), attenuation ≤ 2.2dB/100m (20℃)
3. Operating Temperature: -20℃ ~ +60℃, Storage Temperature: -40℃ ~ +70℃
4. Humidity Adaptability: Working humidity 10% ~ 90% RH (non-condensing), storage humidity 5% ~ 95% RH (non-condensing)
5. Dielectric Strength: 1500V AC, 1 minute, no breakdown or arcing phenomenon
6. Insulation Resistance: ≥ 100MΩ (500V DC)
(III) Functional Configuration
1. Connection Module: Supports mixed installation of optical fiber adapters (SC/LC/FC/ST) and electrical connectors (RJ45, terminal block), realizing integrated distribution of optical and electrical signals
2. Fixing Structure: Equipped with cable fixing clips and winding posts inside, ensuring stable cable routing and preventing signal attenuation caused by cable pulling
3. Protection Function: Built-in overvoltage and overcurrent protection components for electrical interfaces, effectively protecting connected equipment from surge damage
4. Identification System: Provides clear labeling positions for each interface and module, facilitating maintenance and management
III. Manufacturing and Quality Control
1. Material Requirements: All structural parts and electronic components must meet RoHS environmental protection standards, with qualified certificates for raw materials
2. Production Process:
• Metal processing: Precision stamping and bending, dimensional tolerance ≤ ±0.5mm
• Surface treatment: Electrostatic spraying film thickness 60μm ~ 80μm, uniform color, no bubbles, scratches or peeling
• Assembly process: Strictly follow assembly drawings, with torque control for fasteners (torque value 3.5N·m ~ 5N·m)
3. Quality Inspection:
• Incoming inspection: 100% inspection of raw materials and components, eliminating unqualified products
• Process inspection: Key process inspection points are set up, with sampling inspection ratio not less than 30%
• Final inspection: Each finished product undergoes appearance inspection, dimensional measurement, electrical performance test and environmental adaptability test, with qualified rate 100% before leaving the factory
IV. Packaging and Transportation
1. Packaging: Use corrugated carton with EPE foam lining, ensuring that the product is not damaged during transportation; each package is labeled with product name, part number, model, quantity, weight and transportation precautions
2. Transportation: Suitable for road, railway and air transportation; avoid severe vibration, impact and exposure to sunlight and rain during transportation
3. Storage: Store in a dry, ventilated and clean warehouse, away from corrosive gases, flammable and explosive materials, with stacking height not exceeding 5 layers
V. Warranty Period
Provide a 2-year warranty period from the date of delivery. During the warranty period, free repair or replacement of defective products caused by manufacturing quality will be provided (excluding damage caused by improper use, human factors or natural disasters).
Home
